Datto Partner and Installer for Businesses
The Network Installers is a Datto partner and installer for businesses and MSPs, deploying Datto Wi-Fi access points, switches, edge routers, and BCDR rack infrastructure.
Get A Free Quote
🔒︎ Your information will be kept Private
19+
Years Experience
20k+
Locations Protected
99%
Satisfaction Rating
What The Network Installers Does as a Datto Partner
The Network Installers is a Datto partner that installs Datto Networking products and the cabling infrastructure that supports Datto BCDR appliances. We are not a Datto MSP and do not resell backup-as-a-service. We deploy the hardware and run the structured cabling that lets your Datto stack work the day it’s powered on. Our installer scope covers the full Datto Networking lineup: Wi-Fi access points (AP440, AP840, AP840E), cloud-managed switches, edge routers with 4G LTE failover, Secure Edge for remote work, and Managed Power. For Datto BCDR appliances like SIRIS and ALTO, we handle the rack space, redundant power, and Cat6 or fiber runs that keep the appliance online and reachable. Most clients hire us in one of three scenarios: they bought Datto Networking and need a certified low-voltage installer to deploy it, they have a SIRIS appliance arriving and need rack/cabling/power readiness, or they’re building out a new office where Datto Networking has been specified in the IT scope. The Network Installers holds a C7 Low Voltage License #1039579 and is BICSI-certified for structured cabling.
Site Assessment
Our BICSI-certified field technicians walk your facility before any equipment is ordered. The site assessment documents existing cable runs, switch and rack capacity, redundant power, ceiling and wall mounting paths, and Wi-Fi coverage gaps. The output is a deployment plan your IT team can sign off on.
Engineer
Engineering converts the site assessment into a working design. For Datto Wi-Fi, we build a heat map and AP placement plan tied to your floor plate. For Datto switches and edge routers, we map the topology and uplinks. For SIRIS and ALTO, we engineer rack space, dual power, and management network access.
Install
Installation covers the physical work: pulling and terminating Cat6 or fiber, mounting access points, racking switches and BCDR appliances, configuring uplinks, and validating every drop with a certified test report. Datto Network Manager is registered to your account before we leave the site.
Datto Products The Network Installers Installs
We install the full Datto Networking portfolio plus the cabling and rack infrastructure that supports Datto BCDR appliances. Cloud-managed Wi-Fi APs (AP440 indoor, AP840 high-density, AP840E outdoor), cloud-managed switches, edge routers, Secure Edge, Managed Power, and SIRIS or ALTO appliance racking.
Telecommunications service provider
Datto Networking Deployment for Multi-Site Businesses
Datto Networking is built for cloud-managed deployment across multiple sites from one Datto Network Manager portal. We handle the installer side: site surveys at every location, structured cabling to spec, AP and switch mounting, and uplink configuration. Each site is registered to your Datto Network Manager tenant before handoff.
Multi-site retail chains, school districts, and distributed offices are the most common deployments. We coordinate scheduling so locations come online on one cutover window.
Datto Wi-Fi Access Points: AP440, AP840, AP840E
Datto Wi-Fi runs on three Wi-Fi 6 access point models, each fit to a different deployment. The AP440 is the indoor AP for offices, classrooms, and clinical spaces. The AP840 is the high-density AP for warehouses, gyms, and lecture halls. The AP840E is the outdoor-rated AP for parking lots and exterior coverage. See our Wi-Fi installation page for the full deployment scope.
Datto Switches, Edge Routers, and Secure Edge
Datto cloud-managed switches give you PoE+ power for access points, IP cameras, and VoIP phones from a single portal. We install the switch, run the uplink, and validate every port. Datto Edge Routers handle WAN routing with 4G LTE failover so a single ISP outage does not take a branch office offline. We install the router, terminate the WAN circuit, and configure failover. Datto Secure Edge gives remote workers a managed connection back to your network without standing up a traditional VPN.
Locations
The Network Installers is headquartered in California with offices across the state’s major metros and project capability nationwide. The locations below are where we have the deepest local installer presence for Datto Networking and BCDR cabling.
San Jose
San Jose is the densest cluster of tech companies, MSPs, and enterprise offices in The Network Installers' service map. Our Bay Area team installs Datto Wi-Fi, switches, and edge routers across South Bay corporate campuses and SIRIS appliance racking for finance, biotech, and SaaS companies. South Bay site surveys are typically scheduled within one week.
Los Angeles
Los Angeles deployments span entertainment, retail, education, and city government. The Network Installers' LA crew installs multi-site Datto Wi-Fi for studios, retail chains, and school districts, and racks SIRIS appliances for production-environment BCDR. The LA service area runs from the San Fernando Valley through Long Beach and out to the Inland Empire.
Oakland
Oakland's mix of port logistics, tech startups, and multi-tenant office buildings is well suited to Datto Networking's cloud-managed model. We install Datto Wi-Fi and switches across East Bay warehouses, offices, and educational facilities, with site surveys covering the entire East Bay corridor.
San Diego
San Diego deployments lean toward biotech, defense contractors, and hospitality. Datto Wi-Fi APs and edge routers fit hotel chains and mid-size offices, while SIRIS racking is common in biotech and life-sciences environments. The service area covers downtown, La Jolla, Sorrento Valley, and Carlsbad business parks.
Sacramento
Sacramento's state government, school district, and financial-services concentration is a strong fit for Datto's cloud-managed networking model. Our Sacramento crew installs Datto Wi-Fi and switches across capitol-area offices, K-12 districts, and credit unions, and handles SIRIS appliance cabling for multi-branch organizations.
San Francisco
San Francisco buildings are dense, multi-tenant, and often historic, which makes structured cabling and AP mounting non-trivial. We install Datto Wi-Fi, switches, and edge routers across SoMa, Financial District, North Beach, and Mission Bay offices, with permits and after-hours scheduling handled in-house.
Datto Partner and Installer FAQs
What is the difference between a Datto Partner and a Datto installer?
A Datto Partner is an MSP that resells Datto’s software and managed services such as RMM, SIRIS backup, SaaS Protection, and Autotask PSA, and bills clients monthly for those services. A Datto installer deploys the physical hardware (Wi-Fi access points, switches, edge routers, BCDR appliances) and runs the cabling that connects everything. The Network Installers is a Datto installer, not a Datto MSP.
Does The Network Installers also install Datto BCDR appliances?
Yes. We do not resell SIRIS or ALTO licenses, but we install the rack, redundant power, and Cat6 or fiber runs that the appliance needs to operate. Many clients buy the BCDR licensing through their Datto MSP and bring us in to handle the physical installation at the data closet or server room.
Which Datto Wi-Fi access points does The Network Installers install?
We install all three current Datto Wi-Fi 6 models: the AP440 indoor AP for offices and classrooms, the AP840 high-density AP for warehouses and large venues, and the AP840E outdoor-rated AP for exterior coverage.
Do you install Datto products outside California?
Yes. The Network Installers is California-headquartered with installer capability nationwide. Multi-site rollouts where every location goes online on the same cutover window are a regular project type.
Industries We Serve
Datto Networking shows up across most B2B verticals because the cloud-managed model fits multi-site, multi-floor, and high-density environments. Below are the industries where The Network Installers most often deploys Datto Wi-Fi, switches, edge routers, and BCDR cabling.
Commercial
Multi-floor commercial offices and mixed-tenant buildings are the most common Datto Networking deployment. AP440 indoor APs cover open-plan workspaces, AP840 covers conference centers and atriums, and Datto switches handle PoE for the entire AP fleet. We pull the cabling, mount and terminate the equipment, and register every device to your Datto Network Manager.
Office
Office Datto deployments usually start with Wi-Fi: AP440 access points on a 30 to 40 foot grid, Cat6A drops to each AP, and a Datto cloud-managed switch with PoE+ capacity. We add Datto Edge Routers when the client wants 4G LTE failover so an ISP outage does not take the office offline. Coverage is validated against the engineered heat map.
Warehouse
Warehouses are high-density Wi-Fi environments with metal racking, ceiling height of 30 feet or more, and constant forklift and scanner traffic. AP840 high-density APs and AP840E outdoor APs handle dock doors and yards. We engineer placement to avoid roaming gaps in pick paths and run the fiber backbone between the warehouse floor and the IDF closet.
Manufacturing
Plant-floor manufacturing environments need network gear that survives heat, dust, and vibration, plus failover that keeps production lines online during ISP outages. We deploy Datto Edge Routers with 4G LTE failover at the plant edge, AP840 access points across the production floor, and Datto switches in conditioned MDF and IDF closets with proper grounding.
New Construction
New-construction Datto deployments start in the rough-in phase. We coordinate with the GC to pull conduit and cable during framing, install structured cabling to MDF and IDF rooms before drywall, and mount Datto access points and switches during finish-out. The result is a fully commissioned Datto Networking stack on day-one of occupancy.
Education
K-12 districts and college campuses use Datto Networking for cloud-managed Wi-Fi across multiple buildings. AP440s cover classrooms and offices, AP840s cover gyms and lecture halls, and AP840E covers courtyards and athletic fields. The Network Installers has installed network infrastructure for school districts including Azusa Unified and Notre Dame High School.
Healthcare
Clinical environments need reliable Wi-Fi for EHR access on workstation-on-wheels carts, mobile devices, and clinical IoT. AP440 access points cover patient rooms and corridors, AP840 covers clinic floors and waiting areas. We pull plenum-rated cable through clinical spaces with infection-control protocols.
Government
City buildings, water districts, transit authorities, and state agencies use Datto Edge Routers with 4G LTE failover to keep branch offices online during ISP outages, and Datto Wi-Fi for staff and conference-room coverage. Our government facility installation service covers the rollout end to end.
Technology
Tech companies and SaaS businesses use Datto Networking for office Wi-Fi, switching, and edge routing in a single cloud-managed portal. We rack and cable Datto switches, mount AP440 access points across open-plan floor plans, and install SIRIS appliances in the server room with redundant power and uplinks.
Cannabis
Cannabis dispensaries and cultivation facilities need network infrastructure that supports state-mandated seed-to-sale tracking, security camera systems, and POS terminals. We install Datto Wi-Fi for retail floor coverage, Datto switches for camera PoE, and structured cabling between cultivation rooms and the IDF.
Hospitality
Hotels and resorts deploy Datto Wi-Fi for guest-room coverage, lobby and conference-center density, and outdoor pool and patio areas. AP440 covers guest corridors and rooms, AP840 covers ballrooms and restaurants, AP840E covers exterior amenities. We pull plenum-rated cable above guest-room ceilings with minimal disruption to occupied wings.
Retail
Multi-site retail chains are the textbook Datto Networking use case. One Datto Network Manager portal manages every store, every AP, and every switch. We coordinate rollout schedules so all locations come online on the same cutover window, with site surveys, cabling, mounting, and validation handled per location.
Blog
IoT Statistics 2026: Devices, Market Size, Connectivity, and Security
There were 21.1 billion connected IoT devices worldwide in 2025, up 14% over the prior year, according to IoT Analytics. That is a big number, but
Data Center Growth Statistics for 2026
Global data center capacity is on track to roughly double to about 200 gigawatts by the end of the decade, adding some 97 gigawatts of
Splicing Coax Cable: A Step-by-Step Guide (2026)
To splice coax cable the right way, terminate each end with a compression connector and join the two ends with a female-to-female barrel connector. You
Cat6e vs Cat6a Ethernet Cable: What’s the Difference? (2026)
Cat6a is a ratified cabling standard that carries 10 Gbps over the full 100 meters at 500 MHz. Cat6e is not a standard at all.
Ethernet Splitter vs Switch: What’s the Difference? (2026)
An Ethernet splitter and an Ethernet switch look similar but do opposite jobs. A splitter is a passive adapter that lets two devices share the wires in a single
IDF in Networking: What an Intermediate Distribution Frame Is (2026)
An IDF, or intermediate distribution frame, is a secondary network hub that connects the devices on one floor or zone of a building back to
Get a Quote for Your Datto Deployment
Let’s start a conversation.
Fill out the form below and a Network Installation specialist will call you.
